Call Us Today:
630.629.9440 

Search Catalog
      GO   
 All Categories    2 1/2” Hydrant Pit Valve
All Categories > Carter Ground Fueling > Hydrant Pit Valves > 2 1/2” Hydrant Pit Valve > Item # 61524D  

Item # 61524D, 2 1/2” Hydrant Pit Valve

    Download PDF Download PDF   
    border="0" Printable Page  
    Email Email This Page  
    Save To Favorites Save To Favorites
  

The Carter Model 61524 Hydrant Pit Valve is designed to provide deadman control of the refueling operation within the hydrant pit. Both air and lanyard operation is available. The unit is available with either 6-inch or 4-inch inlet flanges and both terminate with the 2½-inch International Standard Three Lug Aircraft Bayonet Adapter. Now also available with an adapter kit to install the unit in older 12 & 13" diameter pits with 3" mounting flanges.The 61524 utilizes many of the same parts as are used in the other Carter hydrant valves. The basic pit valve assembly consists of three parts, lower valve assembly, upper valve assembly and the pilot valve. The lower pit valve assembly contains a small isolation valve which will allow the removal and servicing of the upper valve assembly and the pilot valve while the pit valve is under pressure (See service manual for proper instructions for use).

The 61524 Hydrant Pit Valve is designed to minimize the propagation of surge pressure shocks into the upstream piping system during closure of the valve.



Unit of Measure: Imperial Metric Both

 Specifications   Features   Mating Parts   Ordering Information   

Manufacturer
Carter Ground Fueling

Product Type
Hydrant Valves

Type
2 1/2” Hydrant Pit Valve

Series
Model 61524

Working pressure
300 psi

Closing Time
2 to 5 seconds

Opening Time
5 to 10 seconds [from zero to 600 gpm (2271 l/min.)]

Weight
49 lb

Basic Model
Lanyard operated pilot valve for manual on/off control. Valve allow flow in the fueling direction only.

Technical Information
  • Overshoot - 30.0 gals (114 liters) maximum at 600 gpm (2271 l/min.).
  • Pilot valve air pressure required for options E or J - 60 psi min. (4.2 bars).
  • Mates Carter Couplers 60445 and 61445, Thiem F211 and similar Avery Hardoll and Zenith Couplers

    • Option
    		C - U.S. standard product selection
    G - 6" 300 lbs. ANSI inlet spool
    H - 4-mesh stoneguard to option G only
    M - Quick disconnect to air pilot connection on options E & J only. Mates Hansen Socket B2-H16.
    N - Hardware kit to allow installation into 12 or 13" pits with 3" ANSI mounting flanges

    Coupler Model
    		60445 - Coupler - 21/2 with 90° elbow and various inlet thread options.
    61445 - Coupler - 2 1/2 with 90° elbow and various inlet thread options. (Will supersede 60445 when available in 1993.)


     MORE IMAGES 

    ·  Envelope Dimensions


     DOWNLOADS 

    Valve Operation
    (PDF, 268KB)


    Contact Becker & Associates
              © 2024 Becker & Associates : 563 Commonwealth Dr | Suite 600 | East Dundee, Illinois 60118 | P: 630.629.9440 | F: 630.620.6383