Call Us Today:
630.629.9440 

Search Catalog
      GO   
 All Categories    21 and 22 Series Fuel-Gard® Monitor Housings
All Categories > Facet International > Aviation Division > Fuel Monitors > 21 and 22 Series Fuel-Gard® Monitor Housings > View Items  

21 and 22 Series Fuel-Gard® Monitor Housings

 
Check up to five results to perform an action.

The Facet 21 Series Fuel-Gard monitors, installed with one Fuel-Gard monitor cartridge, will continually check the entire flow of fuel, not just mere samples, for water or solids contamination. By performing three jobs, this small compact monitor assures clean, dry fuel. It absorbs free and emulsified water, removes ultra-fine solids even when surfactants and fuel additives are present, and shuts down the system flow when hit with a localized slug of water.

Both interior and exterior surfaces of the carbon steel body are epoxy coated to protect against corrosion. This sturdy, single cartridge housing is easy to maintain and requires only 2" (51 mm) base clearance for cartridge change out.




    Download PDF Download PDF   
    border="0" Printable Page  
    Email Email This Page  
    Save To Favorites Save To Favorites
  
Compare Items
   
  Results 1 - 2 of 2 Unit of Measure: Imperial Metric Both 1 

Item #

Series

Inlet Connection Size

Outlet Connection Size

Nominal Length

O.D.
VFG-21-609 21 1 1/2 in 1 1/2 in 16 in
406 mm 		6 1/2 in
165 mm
VFG-22-612 22 1 1/2 in 1 1/2 in 20 in
508 mm 		6 1/2 in
165 mm
  Results 1 - 2 of 2 1 
Contact Becker & Associates
          © 2024 Becker & Associates : 563 Commonwealth Dr | Suite 600 | East Dundee, Illinois 60118 | P: 630.629.9440 | F: 630.620.6383