Call Us Today:
630.629.9440 

Search Catalog
      GO   
 All Categories    Hose End Control Valves
All Categories > Carter Ground Fueling > Nozzles Related Accessories > Hose End Control Valves > Item # 47013 HECV  

Item # 47013 HECV, Hose End Control Valves

    Download PDF Download PDF   
    border="0" Printable Page  
    Email Email This Page  
    Save To Favorites Save To Favorites
  

The Carter Hose End Control Valves (HECV’s) provide pressure limitation at the outlet to protect the aircraft while refueling. Three different pressure settings are available to tailor the control system to the customer’s requirements. The resultant control pressure curve is flat with little “droop” in pressure up to 300 U.S. gpm. Downstream surge pressure generated as a result of a rapid rise in downstream pressure (aircraft valve closure) is limited to 75 psi.

Outlets are available to mate the HECV to any Carter or Thiem nozzle. Threaded inlet and outlet adapter fittings are also available for alternative installations away from a nozzle. A variety of inlet fittings are available to mate industry standard hose connections.



Unit of Measure: Imperial Metric Both

 Specifications   Features   Ordering Information   Operation   

Manufacturer
Carter Ground Fueling

Product Type
Nozzle Related Accessories

Type
Hose End Control Valves

Series
Model 47013

Technical Information
  • Nominal spring settings (maximum pres-sure limits will be 5 psi greater than spring) - 35, 45 & 55 psi available.
  • Surge pressure control - 75 psi maximum with 0.5 second valve closure minimum.
  • Lock Up Pressure - 10 psi maximum over spring setting.
  • Pressure Limitation - 5 psi over spring set-ting with inlet pressure up to 100 psi
  • Hysteresis (difference in pressure limits between increasing and decreasing flow rates) - pressure limits with decreasing flow rates will normally be slightly greater than for increasing flow rates.
  • Defueling possible through unit, however block out device required to maintain maximum flow. Use Carter Block Out Device 61656.
  • 61656 Block Out Device recommended if system secondary control valve is to be checked.

    • Basic Model
    		For installation on Carter 64348 or 64349 Nozzles either in conjunction with a Carter 64015 Ball Valve or when a dual HECV installation is desired on a Carter nozzle.

    Basic Configuration
    		3 - Specifies 35 psi spring setting
    4 - Specifies 45 psi spring setting
    5 - Specifies 55 psi spring setting.
    A - 40 Mesh Screen
    B - 60 Mesh Screen
    C - 100 Mesh Screen
    D - 2 1/2” BSPP Male straight outlet (40913)
    E - 2 1/2” NPT Female straight inlet (41914)
    F - Outlet adapter to mate Theim F116/F117 Nozzle (60435)
    N - 2 1/2” NPT Male straight outlet (40779)
    R - Inlet adapter to mate Flight Refueling disconnect (41600)
    T - Adapter flange to outlet to mate military nozzle inlet (60797)
    W - Inlet & outlet flanges to mate Whittaker F116 & F117 nozzles

    The Male Adapter Required To Mate The Desired Inlet
    		6 - Male adapter half (43046) to mate standard female quick disconnect (43108) & old style dry break QD (60672-1)
    7 - Male adapter half to mate 61154 Dry Break (44185)

    Inlet Thread Type & Size
    		H - Inlet thread - 2 1/2" NPT
    K - Inlet thread - 2 1/2” BSPP
    L - Inlet thread - 3” NPT
    M - Inlet thread - 3” BSPP
    P - Inlet thread - 2” NPT


     MORE IMAGES 

    ·  Flow Characteristics

    ·  Envelope Dimensions

    ·  Options

    ·  47013 Hose End Control Valve


    Contact Becker & Associates
              © 2024 Becker & Associates : 563 Commonwealth Dr | Suite 600 | East Dundee, Illinois 60118 | P: 630.629.9440 | F: 630.620.6383