cage code id 0LFK5 : sitemap :
Login
Call Us Today:
800.544.6643 (USA)
630.629.9440 (TEL)

Search Catalog
      GO   
 All Categories    HFG Series Horizontal Fuel-Gard® Monitor Housings
All Categories > Facet International > Aviation Division > Fuel Monitors > HFG Series Horizontal Fuel-Gard® Monitor Housings > Item # HFG-C-10220  

Item # HFG-C-10220, HFG Series Horizontal Fuel-Gard® Monitor Housings


    Download PDF Download PDF   
    border="0" Printable Page  
    Email Email This Page  
    Save To Favorites Save To Favorites
  

Eliminate the need for other water defense devices and receive maximum water removal, solids holding capacity and shutdown protection to assure clean, dry fuel delivery while meeting the latest institute of petroleum IP 1583 4th edition

The new Facet HFG Series Horizontal Fuel-Gard monitor housings, equipped with either Facet's FG Series or PS Series 2" (51 mm.) OD monitor cartridges, continually check the entire flow of fuel, not just mere samples, for water or solids contamination. By performing three jobs, the FG Series monitors assure clean, dry fuel. They absorb free and emulsified water, remove ultra-fine solids even when surfactants and fuel additives are present, and shut down the systems flow when hit with a localized slug of water. In addition, the PS Series monitors positively shut down system flow when pressure drop across the cartridge exceeds 40 psi eliminating any possibility of media or water transmission while also preventing the system being reused. They are designed to flow from the outside to inside at a rate of 1 gallon (3.79 liters) per inch of length.

Facet's Fuel-Gard monitor housings are built to ASME Code, constructed of carbon steel and designated for maximum working pressure of 150 psi. They are furnished with FG Series monitor cartridges that meet and exceed the latest edition of Institute of Petroleum (I.P.) Specifications and Qualification Procedures - Aviation Fuel Filter Monitors With Absorbent Type Elements.

Facet's GNG Series monitor cartridges are interchangeable with the FG Series when MIL-M-81380C(AS) requirements are desired.




Unit of Measure: Imperial Metric Both

 Specifications   Standard Design Features   

Manufacturer

Facet International

Product Type

Monitor Housings

Series

HFG

Max. Working Pressure

150 psi

Closure Seal

Buna-N

Exterior

Prime Coated

Interior

Epoxy Coated

Flow Direction

Outside to Inside

Flow Rate

200 gal
757
lit

Required Cartridges

View
FG-220-4 (10 qty.)

Housing Liquid Volume

7.5 gal
28
lit

Dry Weight

310
141
kg

Housing Type

Flat

Inlet Connection Size

3 in
76
mm

Inlet Connection Type

Flanged

Outlet Connection Size

3 in
76
mm

Outlet Connection Type

Flanged

Drain Connection Size

3/4 in

Drain Connection Type

NPT

Vent and Relief Valve Connection Size

3/4 in

Vent and Relief Valve Connection Type

NPT

Differential Pressure Gauge Connection Size

1/4 in

Differential Pressure Gauge Connection Type

NPT

A

8 5/8 in
219
mm

B

40 in
1016
mm

C

8 in
203
mm

D

8 in
203
mm

E

7 1/4 in
184
mm

F

6 in
152
mm

G

24 in
610
mm

Options

Automatic air eliminator
Differential pressure gauge

Interlock Device

Manual drain valve

Pressure relief valve

Sampling probe

Victaulic inlet and outlet connections


Contact Becker & Associates
          © 2011 Becker & Associates : 563 Commonwealth Dr | Suite 600 | East Dundee, Illinois 60118 | P: 630.629.9440 | F: 630.620.6383