Becker & Associates, Inc.
563 Commonwealth Drive,Suite 600
East Dundee, IL 60118
Phone: 630-629-9440 • Fax: 630-620-6383
Email: sales@beckerandassociates.com
All Categories > Facet International > Aviation Division > Fuel Monitors > FG-Series Fuel-Gard® Monitor Cartridges
2" O.D. - Outside/Inside Flow > View Items  

FG-Series Fuel-Gard® Monitor Cartridges
2" O.D. - Outside/Inside Flow

 
Check up to five results to perform an action.

Maximum water removal, solids holding capacity and shutdown protection assures clean, dry fuel

The Facet 2" (51 mm.) nominal outside diameter FG Series Fuel-Gard monitor cartridges perform three jobs - they absorb free and emulsified water to less than 5 ppm; remove ultra-fine solids even when surfactants and fuel additives are present; and shut down system flow when hit with a localized slug of water, giving you clean, dry fuel. The FG Series Fuel- Gard monitor cartridges are designed to flow from the outside to inside at a rate of 1 gallon (3.79 liters) per inch of length.

Fuel-Gard monitor cartridges meet the 4th edition of IP 1583 Specifications and Qualification Procedures - Aviation Fuel Filter Monitors With Absorbent Type Elements including the following optional tests:

  • 50 PPMV Water Test Short Element
  • 50 PPMV Sea Water Test
  • Tested using JP-8 Jet Fuel (Military) Static
    Dissipator, Corrosion Inhibitor, Petronate L and FSII Anti-Icing Agent Diegme, MIL-PRF-81380D

    The presence of water or solids in the incoming fuel will be indicated by an increase in the pressure differential or a decrease in the flow rate as the cartridges reach their maximum capacity for solids, water or a combination of both. When either happens, the cartridges should be replaced.

    Each FG Series Fuel-Gard monitor cartridge is constructed of various water absorbent media, plus fine filtration layers wrapped around a molded center tube for balanced flow and structural strength - all encased in a protective outer sock material. The end cap material is of injection molded, glass-filled nylon which provides superior strength and ease of maintenance. This material gives excellent support for the o-ring on the mounting/adaptor end.



    •   Results 1 - 8 of 8 1 

    Item #

    Flow Direction

    Nominal Length

    O.D.

    I.D.
    FG-205-4 Outside to Inside 5 7/8 in
    150     mm     		1 3/4 in
    45     mm     		7/8 in
    23     mm
    FG-207-4 Outside to Inside 7 11/16 in
    195     mm     		1 3/4 in
    45     mm     		7/8 in
    23     mm
    FG-210-4 Outside to Inside 10 7/8 in
    227     mm     		1 3/4 in
    45     mm     		7/8 in
    23     mm
    FG-215-4 Outside to Inside 15 7/8 in
    404     mm     		1 3/4 in
    45     mm     		7/8 in
    23     mm
    FG-217-4 Outside to Inside 17 7/8 in
    454     mm     		1 3/4 in
    45     mm     		7/8 in
    23     mm
    FG-220-4 Outside to Inside 20 7/8 in
    531     mm     		1 3/4 in
    45     mm     		7/8 in
    23     mm
    FG-225-4 Outside to Inside 25 7/8 in
    658     mm     		1 3/4 in
    45     mm     		7/8 in
    23     mm
    FG-230-4 Outside to Inside 30 7/8 in
    785     mm     		1 3/4 in
    45     mm     		7/8 in
    23     mm
      Results 1 - 8 of 8 1 
    Print Back