Becker & Associates, Inc.
563 Commonwealth Drive,Suite 600
East Dundee, IL 60118
Phone: 630-629-9440 • Fax: 630-620-6383
Email: sales@beckerandassociates.com
All Categories > Carter Ground Fueling > Hydrant Fueling Couplers > 2 1/2" Hydrant Fueling Coupler > Item # 61444  


Item # 61444, 2 1/2" Hydrant Fueling Coupler

The Carter Model 61445 Hydrant Fueling Coupler is designed to connect a hydrant servicer to a hydrant valve which incorporates the 2 1/2 inch International Standard Three Lug Aircraft Bayonet Adapter. The 61445 is a lightweight, rugged coupler that utilizes many common parts with Carter's 60427 Nozzle.



 Specifications 

Manufacturer
Carter Ground Fueling

Product Type
Couplers

Type
2 1/2” Hydrant Coupler

Series
Model 61445

Adapters
Short Male Half Adapter to option D Elbow

Weight
+1.0

Basic Configuration
D - 90° Elbow - terminates in 6-bolt flange (60427 type) to mate various options. (44796); Weight +2.7 lb; Use with options T, 4, 6 or 7
H - Product Selection to mate positions 1-5 of Avery Hardoll Valves (44797-3); Weight +0.3; Standard coupler does not have product selection
P - Standard Product Selection (44797-2); Weight +0.3; Standard coupler does not have product selection
R - Male Adapter Half to basic Coupler (only) to allow it to mate elbow used on older 60445 Coupler (44812); Weight +1.4; New Option D, Elbow, is a ball swivel joint and is not a quick disconnect as in the older 60445 Coupler.
T - Add Male Adapter Half to either basic Coupler or option D, Elbow, to mate to Thiem F382 Elbow or Female Half Quick Disconnect (44805); Weight +0.8 This option allows for replacement of the Thiem F211 Coupler by mating the Thiem QD either directly from
X - Safety Clip to Option 4 or 5. (210641); Weight +0.1; An additional locking device for thumb latched sleeve on disconnect

The Male Adapter Required To Mate The Desired Inlet
Short Male Half Adapter to option D Elbow. (44185); Weight +1.0; Mates with 64001 Thumb Latched Quick Disconnect Swivel.

Inlet Thread Type & Size
H - 2 1/2" NPT Inlet; Add 0.3 lb. for H when used with option 7 or 8 and subtract 2.3 lb. when used with option 6.
K - 2 1/2" BSPP Inlet; Add 0.3 lb. for H when used with option 7 or 8 and subtract 2.23 lb. when used with option 6.
L - 3" NPT Inlet; Add 0.3 lb. for H when used with option 7 or 8 and subtract 2.23 lb. when used with option 6.
M - 3" BSPP Inlet; Add 0.3 lb. for H when used with option 7 or 8 and subtract 2.23 lb. when used with option 6.
N - 2" BSPP Inlet; Add 0.3 lb. for H when used with option 7 or 8 and subtract 2.23 lb. when used with option 6.
P - 2" NPT Inlet; Add 0.3 lb. for H when used with option 7 or 8 and subtract 2.23 lb. when used with option 6.



Print Back