cage code id 0LFK5 : sitemap :
Login
Call Us Today:
800.544.6643 (USA)
630.629.9440 (TEL)

Search Catalog
      GO   
 All Categories    HP Series Single-Stage Coalescer Housings
All Categories > Facet International > Aviation Division > Single-Stage Coalescers > HP Series Single-Stage Coalescer Housings > View Items  

HP Series Single-Stage Coalescer Housings

Check up to five results to perform an action.

Facet HP Series single-stage water coalescers, commonly referred to as repack or hay pack housings, are horizontal, cylindrically shaped housings designed to protect filtration systems from gross amounts of water and solid contaminants. Facet recommends using their wafer style repack coalescers since they allow the first two sections to be replaced when required. The third and successive sections require fewer changeouts since they may remain relatively free of solids.

Coalescing first starts as the product enters the vessel. Due to the substantially reduced velocity, free water will fall out by gravity. While the product progresses through the mass packed media, further coalescing occurs by impingement of water droplets on the media. At the same time, solids tend to fall out as the liquid enters the housing at a reduced velocity, but are further removed by filtration as the flow continues through the mass media.

All Facet HP Series single-stage water coalescer housings are built to ASME Code, Section VIII, with many standard and optional accessories available to facilitate individual installation requirements.

Facet HP Series single-stage coalescers use wafer repacks to remove gross amounts of water and solids from fuel. They are available in several standard sizes to accommodate flows from 10 to 2000 gpm (38 to 7570 lpm). They provide protection to filtration systems from gross amounts of water and solids that are commonly carried through inbound transport pipelines.

HP Series housings offer an option of using coalescer cartridges for more efficient solids separation and liquid-liquid water separation. Use of an adaptor kit permits returning to the use of repacks at any time.

HP Series housings have no internal moving parts and are designed for easy servicing, thereby reducing maintenance costs. Each housing is manufactured with quality workmanship and materials to give long-lasting and dependable service.




    Download PDF Download PDF   
    border="0" Printable Page  
    Email Email This Page  
    Save To Favorites Save To Favorites
  
Compare Items
   
  Results 1 - 13 of 13 Unit of Measure: Imperial Metric Both 1 

Item #

Flow Rate

Inlet Connection Size

Outlet Connection Size

Sort by

Vent and Relief Connection Size

Drain Connection Size

HP-10 6 gpm
23
lpm
0.80
cfm
1 in
25
mm
1 in
25
mm
1/2 in
13
mm
1/2 in
13
mm
HP-25 15 gpm
57
lpm
2.01
cfm
1 1/2 in
38
mm
1 1/2 in
38
mm
1/2 in
13
mm
1/2 in
13
mm
HP-50 26 gpm
98
lpm
3.48
cfm
1 1/2 in
38
mm
1 1/2 in
38
mm
1/2 in
13
mm
3/4 in
19
mm
HP-100 60 gpm
227
lpm
8.02
cfm
3 in
76
mm
3 in
76
mm
3/4 in
19
mm
3/4 in
19
mm
HP-150 100 gpm
379
lpm
13.37
cfm
3 in
76
mm
3 in
76
mm
3/4 in
19
mm
3/4 in
19
mm
HP-200 155 gpm
587
lpm
20.72
cfm
3 in
76
mm
3 in
76
mm
1 in
25
mm
1 in
25
mm
HP-300 225 gpm
852
lpm
30.08
cfm
4 in
102
mm
4 in
102
mm
1 in
25
mm
1 1/2 in
38
mm
HP-500 350 gpm
1325
lpm
46.79
cfm
6 in
152
mm
6 in
152
mm
1 in
25
mm
1 1/2 in
38
mm
HP-750 510 gpm
1930
lpm
68.18
cfm
6 in
152
mm
6 in
152
mm
1 1/2 in
38
mm
2 in
51
mm
HP-1000 720 gpm
2725
lpm
96.25
cfm
8 in
203
mm
8 in
203
mm
1 1/2 in
38
mm
2 in
51
mm
HP- 1500 940 gpm
3558
lpm
125.66
cfm
8 in
203
mm
8 in
203
mm
1 1/2 in
38
mm
2 in
51
mm
HP-1800 1200 gpm
4542
lpm
160.42
cfm
10 in
254
mm
10 in
254
mm
1 1/2 in
38
mm
2 in
51
mm
HP-2000 1425 gpm
5394
lpm
190.49
cfm
10 in
254
mm
10 in
254
mm
1 1/2 in
38
mm
2 in
51
mm
  Results 1 - 13 of 13 1 
Contact Becker & Associates
          © 2011 Becker & Associates : 563 Commonwealth Dr | Suite 600 | East Dundee, Illinois 60118 | P: 630.629.9440 | F: 630.620.6383