Becker & Associates, Inc.
563 Commonwealth Drive,Suite 600
East Dundee, IL 60118
Phone: 630-629-9440 • Fax: 630-620-6383
Email: sales@beckerandassociates.com
All Categories > Facet International > Aviation Division > Coalescer Separators-Fifth Edition > CAA Series 5 Coalescer Cartridges
Qualified to API 1581, 5th Edition > View Items  

CAA Series 5 Coalescer Cartridges
Qualified to API 1581, 5th Edition

 
Check up to five results to perform an action.

For Maximum Water Coalescing Efficiency and Solids Holding Capacity
Facet CAA Series 5 coalescer cartridges offer the finest performance available. This standard line of high flow coalescer cartridges removes ultra-fine solids and enhances separation of water from jet fuel.

The Facet coalescer separator housings equipped with CAA Series 5 coalescer and companion separator cartridges have been tested and fully qualified to meet the performance requirements of API Bulletin 1581, Fifth Edition, Category C, Type S. (Category C replaces the previous class A, B, and C of API-1581 3rd Edition.)

Built for balanced fluid flow-thru and structural strength, each CAA Series 5 coalescer cartridge is a single-piece construction of various combined media, precisely arranged in many layers and pleats, wrapped around a treated, perforated metal center tube - all encased in an outer sock material. All are 6" OD (152 mm) by 3 1/2" ID (89 mm) and available in standard interchangeable nominal lengths in increments from 11 1/4" (290 mm) to 57 1/4" (1450 mm).

The CAA Series 5 coalescer cartridges are available in two cartridge mounting styles: self-centering rod mount and screw base. The rod mount style has treated metal end caps, while the screw base ends are injection molded, glass-filled nylon. This screw base material offers superior strength and ease of maintenance - uniform threads, no shrinkage, no galling and no gasket to recover.

A permanently affixed Buna-N gasket seals against the V-type knife edge mounting adaptor to provide a positive seal. It will not separate from the cartridge during installation or change out.



  Results 1 - 15 of 15 1 

Item #

Nominal Length

O.D.

I.D.

Mounting Style
CAA11-5 11 1/4 in
290 mm 		6 in
152 mm 		3 1/2 in
89 mm 		Rod
CAA14-5 14 1/2 in
370 mm 		6 in
152 mm 		3 1/2 in
89 mm 		Rod
CAA14-5SB 15 in
380 mm 		6 in
152 mm 		3 1/2 in
89 mm 		Screw Base
CAA22-5 22 1/4 in
560 mm 		6 in
152 mm 		3 1/2 in
89 mm 		Rod
CAA22-5SB 23 in
580 mm 		6 in
152 mm 		3 1/2 in
89 mm 		Screw Base
CAA28-5 28 3/4 in
730 mm 		6 in
152 mm 		3 1/2 in
89 mm 		Rod
CAA28-5SB 29 in
740 mm 		6 in
152 mm 		3 1/2 in
89 mm 		Screw Base
CAA33-5 33 1/4 in
840 mm 		6 in
152 mm 		3 1/2 in
89 mm 		Rod
CAA33-5SB 34 in
860 mm 		6 in
152 mm 		3 1/2 in
89 mm 		Screw Base
CAA38-5 38 in
960 mm 		6 in
152 mm 		3 1/2 in
89 mm 		Rod
CAA38-5SB 39 in
990 mm 		6 in
152 mm 		3 1/2 in
89 mm 		Screw Base
CAA43-5 43 1/4 in
1100 mm 		6 in
152 mm 		3 1/2 in
89 mm 		Rod
CAA43-5SB 45 in
1140 mm 		6 in
152 mm 		3 1/2 in
89 mm 		Screw Base
CAA56-5 56 1/4 in
1430 mm 		6 in
152 mm 		3 1/2 in
89 mm 		Rod
CAA56-5SB 57 in
1450 mm 		6 in
152 mm 		3 1/2 in
89 mm 		Screw Base
  Results 1 - 15 of 15 1 
Print Back