 Becker & Associates, Inc.
563 Commonwealth Drive,Suite 600
East Dundee, IL 60118
Phone: 630-629-9440 • Fax: 630-620-6383
Email: sales@beckerandassociates.com
|
|
|
|
|
Item # 7528-30-31, Series 7500 Manual or Power Rewind Reels
|
|
|
|
|
|
To handle single 1" through 1-1/2" I.D. hose.
- Heavy-duty reel designed for longer lengths.
- Choose gear-driven crank rewind or chain and sprocket drive powered by an electric, hydraulic or compressed air motor.
- Crank rewind reels supplied with pinion brake and power rewind reels with a comet brake.
- Standard inlet 90° ball bearing swivel joint 1-1/2" female NPT threads and 2" victaulic groove.
- Standard outlet flanged riser 1-1/2" female NPT threads.
- Standard inlet, outlet riser and hub assembly are steel. Optional bronze or aluminum swivel joint and stainless steel hub assembly and riser, are available.
- Rollers may be purchased as accessory items.
- Operate at pressures to 600 psi (41 bar).
- Temperatures from -40° F to +175° F (-40° C to +79° C).
- Consult factory for other pressures & temps.
For:
- Fuel Dispensing (Consult Factory)
- Bulk Transfer
- Suction/Discharge (Consult Factory)
Notes:
- Specifications subject to change.
- Upon request, reels can be supplied with drum lengths other than shown and with disc sizes in other diameters.
- Dimensions shown for reels up to and including 30-31 disc size reflect pressed frames. All others are rollformed channel frames.
- Weights shown in chart are for crank rewind models. ADD these amounts for power rewind models:
Electric Net (lbs.) 40, Ship (lbs.)40, Net
(kg.)18.1, Ship (kg.)18.1
Hydraulic Net (lbs.) 20, Ship (lbs.)20, Net (kg.)9.1, Ship
(kg.)9.1
Air Net (lbs.) 20, Ship (lbs.)20, Net
(kg.)9.1, Ship (kg.)9.1
- Dimension “F" is the overall length of standard model reels.
- For Power Rewind - When ordering power rewind models, prefix model number with:
A = Air Rewind
EP = Electric Rewind (1/2 hp)
HD = Hydraulic Rewind
(Air rewind reels are supplied with control valve and hose; 12v and 24v DC rewind reels are supplied with switch and solenoid; 115v AC rewind reels are not supplied with switch but can be
ordered separately; hydraulic rewind reels are not supplied with control valve.)
- Finish: refer Reel Policies
- Be sure to check dimensions and weights prior to ordering.
Notice: A Flexible Connector must be used between the inlet pipe and the inlet swivel joint.
Applications require a clutch/reduction unit.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
