 Becker & Associates, Inc.
563 Commonwealth Drive,Suite 600
East Dundee, IL 60118
Phone: 630-629-9440 • Fax: 630-620-6383
Email: sales@beckerandassociates.com
|
|
|
|
|
Item # IV 18-39-40, Series IV Power Rewind Reels for Inverted Installation
|
|
|
|
|
|
To handle single 1-1/4" I.D. through 2" I.D. hose.
- Chain and sprocket drive powered by an electric, hydraulic, or compressed air motor.
- Comet brake, air caliper brake, standard.
- 90° ball bearing swivel joint with 1-1/2" female NPT and 2" groove.
- Optional 2" intervals also available.
- Flanged riser with 1-1/2" female NPT threads.
- Inlet, riser, hub assembly are steel.
- Stainless steel, aluminum, at extra cost.
- Pressures to 600 psi (41 bar).
- Temperatures from -40° F to +175° F (-40° C to +79° C).
- Consult factory for other pressures & temps.
Notes:
- Specifications subject to change.
- Upon request, reels can be supplied with drum lengths other than shown and with disc sizes in other diameters.
- For Power Rewind - When ordering power rewind models, prefix model number with:
A = Air Rewind–Supplied with control valve and hose.
EP =Electric Rewind (2/3HP)–12v and 24v DC rewind supplied with non-explosion proof switch and solenoid.
EPJ = Explosion Proof Electric Rewind (2/3 HP)–Supplied with explosion proof switch, solenoid, and junction box.
HD = Hydraulic Rewind–Not supplied with control valve.
- For a detailed parts breakdown drawing, request ISO 103.
- Be sure to check dimensions and weights prior to ordering.
Notice: A Flexible Connector must be used between the inlet pipe and the inlet swivel joint.
When ordering with 2" inlet/outlet, place a “2” after IV. re: IV 220-39-40
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
