 Becker & Associates, Inc.
563 Commonwealth Drive,Suite 600
East Dundee, IL 60118
Phone: 630-629-9440 • Fax: 630-620-6383
Email: sales@beckerandassociates.com
|
|
|
|
|
Item # GTP-172H, MiniMonitor® Assembly
|
|
|
|
|
|
MiniMonitor Equipment uses standard plastic monitor listed by ASTM for Method D2276/IP-216.
The MiniMonitor housing includes a flushing valve located on top of the monitor with a bypass hose and fittings. Before flushing sample connections, move arrow located on flushing valve handle to STOP position. Check connections of bypass hose for firm seating. After connections have been checked, move arrow to the FLUSH position and allow one gallon (or specified volume) to collect in a measuring container. Then turn the valve to the TEST position to direct flow through the filter membrane. This test volume may be from 1 to 5 gallons depending upon contract provisions. The membrane is then rated as to its color using the GTP-1074-1 color rating booklet included in the kit. The darker the membrane, the dirtier the fuel. Some contracts require the weight of the contaminant to be determined. The same apparatus can be used but arrangements must be made with a laboratory.
Electrical bonding is a safety requirement of ASTM Method D2276. Our bonding and grounding hose assembly clips to the metal measuring container (not shown) and also to pipe fitting shown in the photograph.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
