 Becker & Associates, Inc.
563 Commonwealth Drive,Suite 600
East Dundee, IL 60118
Phone: 630-629-9440 • Fax: 630-620-6383
Email: sales@beckerandassociates.com
|
|
|
|
|
Item # GTP-71, Fuel Sampling Equipment
|
|
|
|
|
|
The kits pictured have become standard in the industry for obtaining test samples of jet fuel. With more then 40,000 in service, they have proved to pay for themselves by saving countless hours of downtime because accurate contamination test results are obtained the first time.
In the part, thousand of man hours have been wasted and fueling facilities have been shut down simply because the sampling tap was contributing dirt during the sampling period. Rusty pipe threads steel gate valves and collections of reducing bushings that never are subjected to fuel flow, except when a contamination test is to be run, have been found to be a prime cause at poor color result when tests are performed to ASTMD2276. Flushing does not clean normally stagnant steel fittings,
The probe penetrates through the pipe coupling that is welded to the pipe. There is no possibility of rust and dirt, that usually collects in stagnant pockets (such as welded couplings), reaching the test membrane.
Non-ferrous materials are used in our kits. All passages are small (1/4” pipe sizes) to insure that there will be enough velocity during the flushing cycle to carry away any sediment that may have collected.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
