 Becker & Associates, Inc.
563 Commonwealth Drive,Suite 600
East Dundee, IL 60118
Phone: 630-629-9440 • Fax: 630-620-6383
Email: sales@beckerandassociates.com
|
|
|
|
|
Item # 24-33-34, Series 1 1/2" Manual or Power Rewind Reels
|
|
|
|
|
|
To handle single 1" through 1-1/2" I.D. hose.
- A strong, heavy-duty reel.
- Gear-driven crank rewind or chain and sprocket drive powered by an electric, hydraulic or compressed air motor.
- Optional auxiliary crank rewind for power rewind reels.
- Crank rewind reels supplied with pinion brake and power reels with a comet brake.
- 90° ball bearing swivel joint with 1-1/2" female NPT threads and 2" victaulic groove.
- Flanged riser with 1-1/2" female NPT threads.
- Other sizes and/or threads can be furnished and must be
- Standard inlet, outlet riser, hub assembly are aluminum for
- Stainless steel, at extra cost.
- Rollers and roller mounting brackets are accessory items. Specify roller position.
- Pressures to 600 psi (41 bar)
- Temperatures from -40°F to +175° F (-40° C to +79° C).
- Consult factory for other pressures & temps.
Notes:
- Specifications subject to change.
- Upon request, reels can be supplied with drum lengths other than shown and with disc sizes in other diameters.
- Dimensions shown for reels up to and including 30-31 disc size reflect pressed frames. All others are channel frames.
- Weights shown in chart are for crank rewind models. ADD these amounts for power rewind models:
Electric Net (lbs.) 40, Ship (lbs.)40, Net (kg.)18.1, Ship (kg.)18.1
Hydraulic Net (lbs.) 20, Ship (lbs.)20, Net (kg.)9.1, Ship (kg.)9.1
Air Net (lbs.) 20, Ship (lbs.)20, Net
(kg.)9.1, Ship (kg.)9.1
- When ordering power rewind models, prefix model number with:
A = Air Rewind–Supplied with control valve and hose.
EPJ = Explosion Proof Electric Rewind (1/2 HP)–Supplied with explosion proof switch, solenoid, and junction box.
HD = Hydraulic Rewind–Not supplied with control valve.
- For Air Rewind on models over 100 ft. of 1-1/2" consult factory.
- Be sure to check dimensions and weights prior to ordering.
Notice: A Flexible Connector must be used between the inlet pipe and the inlet swivel joint.
Application may require a different motor and/or a clutch/ reduction unit.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
